How to Install TWRP Recovery On Moto E3

Now you can download and install TWRP Recovery On your Moto E3☺☺☺.By using TWRP Recovery you can Root your device.TWRP Recovery is a Custom Recovery which is also known as TeamWin Recovery built with a touchscreen-enabled interface which allows users to install third-party firmware likes custom Roms and backup the current system,c an install exposed module etc.

How to Install Moto E3 Recovery

This TWRP was shared by XDA Senior member HostZero in xda forum.

Before doing the methods, I just want to warn you that, By doing this you will loose the warranty and sometime if you don’t read the steps and do something wrong can brick your device. So be careful

Requirements :

• This works on Moto E3
• Download - Motorola USB Drivers
• Unlock Bootloader -follow this guide How to Unlock Bootloader on Motorola Devices
• Download - Minimal ADB Tool

How to Install TWRP Recover on Moto E3

• Enable USB debugging.
• In your PC/Laptop, Open the extracted ADB Folder and Open Command Window by pressing Shift Key + Right Mouse Click

• Download TWRP Recovery and Rename the TWRP file to Recovery.img not “recovery.img.img” and Copy it to extracted ADB and Fastboot Tools Folder
• Now connect the PC to Mobile with USB Cable.
• Now connect the PC to Mobile with USB Cable. You need to Reboot the phone into Bootloader – Type the Command from below in your Command window that you opened

adb reboot bootloader

• Your device will boot into bootloader, If it don’t check if your cable or drivers working properly. Now type the below command on your command window

fastboot devices

• To flash the recovery, Type the command

fastboot flash recovery recovery.img

• To flash Boot Code

• fastboot boot recovery.img

• Now reboot your device. TWRP has successfull installed. Enjoy
To reboot into Recovery mode, TURN YOUR PHONE OFF, PRESS VOLUME UP + POWER BUTTON TOGETHER TO ENTER RECOVERY